HWL-1000
| Description | Unit | Specification | |
| Working space | Max. swing diameter | mm | 1350 |
| Max. turning diameter | mm | 1000 | |
| Max. turning height | mm | 950 | |
| Ram end to table surface | mm | 1200 | |
| Table | Table diameter | mm | 1000 |
| Max. loading | ton | 7 | |
| Max. torque | Nm | 11600 | |
| Table speed (low) | rpm | 3~120 | |
| Table speed (high) | rpm | 121~350 | |
| ATC | Tool type | BT-50 | |
| Tool numbers | set | 12 | |
| Tool loading | kg | 50 | |
| Ram size (H*W) | mm | 200*200 | |
| Tool change time | sec | 30 | |
| Travel&Feed | X-axis travel | mm | -60/670 |
| Z-axis travel | mm | 900 | |
| Cross rail travel | mm | 500 | |
| X Rapid feedrate | mm/min | 10000 | |
| Z Rapid feedrate | mm/min | 10000 | |
| Motor | X-axis servo totor | kw | 7 |
| Z-axis servo motor | kw | 7 | |
| Spindle motor | kw | 37/45 | |
| C-axis servo motor | kw | - | |
| Tool spindle motor | kw | - | |
| Machine layout | Machine height | mm | 4700 |
| Machine layout (L*W) | mm | 5900*3600 | |
| Machine weight | kg | 21000 | |
| Power required | kva | 60 | |
| Standard accessories | 4 Jaw independent manual chuck | ○ | |
| Chiller for electric cabinet | ○ | ||
| Machine cover (high cover-top opened ) |
○ | ||
| Hydraulic unit | ○ | ||
| Coolant system with tank | ○ | ||
| Chips conveyor | ○ | ||
| Chip trolley | ○ | ||
| High pressure pump | 7kg/cm2 | ○ | |
| Oil skimmer | ○ | ||
| Auto luberication system | ○ | ||
| Chiller for gear&bearing | ○ | ||
| 3 color warning light | ○ | ||
| Working light | ○ | ||
| Manual operation Pulser Generator | ○ | ||
| Tool kits | ○ | ||
| Machine Level adjusting blocks | ○ | ||
| Gear box for spindle motor | ○ | ||
| Transformer | 440,380V/220V | ○ | |
| Control system | Fanuc 0i 8.4" | ○ | |
| Option accessories | 3 jaws hydraulic chuck | ☆ | |
| Linear scale for X Z axis | ☆ | ||
| High pressure coolant pump | 20kg/cm² | ☆ | |
| 16、24T ATC | ☆ | ||
| Tool measuring system | ☆ | ||
| Work measuring system | ☆ | ||
| Coolant through spindle ( with fine paper filter) |
☆ | ||
| Spindle motor upgrade | ☆ | ||
| Tool holder | ☆ | ||
| Axial reducer (1：3) | ☆ | ||
| Note：○Standard，☆Optional。To design change without extra announcement , please see the quotation. |
|||